Today is Monday, 13th February 2012

Fallout 3 Dropping World Objects With (Complicator Xbox360 Fallout 3 Save Game Editor)


How to drop world items. To start, when you Fswap the items in your inventory with the (Save Editor), Set the number of each item as something different, So you know what is what. Example 10, 20, 30, 40 and so on, Then make a note that 10 is house, 20 is pool table and so on. Now that we got that out of the way, lets get started. To start, drop 5 ammo, 5mm work the best, You are going to use these to stand on, and then drop a item. It’s trial and error, but you stack more ammo higher if the item you drop is sunk into the ground, Or you will go into sneak mode if the item is to high. Like I said it’s trial and error. The other way for world items is to place a item on the ground (Tin Can) save your game, Open up the save editor then turn the (Tin Can) into the item you want, Example a house. Any ways that is the basics, Once you get the hang of it its fast and easy to change the game world as you see fit, Have fun. Below are a few clips of mine you should watch, It shows what is possible with Complicator Xbox360 Fallout 3 Save Game Editor www.youtube.com www.youtube.com Game Save Sharing As of the System Update released on April 16, 2010, you can now use any USB flash drive or disc based hard drive to store Xbox 360 files (gamesaves, gamer profiles, gamer pictures, themes, etc). You can have up to 2 connect USB storage devices at a time with a maximum allotment of 16 GB each for a total of 32 GB at a time. You can have more than 2 storage devices, but you cannot use more


25 Comments

  1. Comments  TheFlamingoShakes   |  Thursday, 22 July 2010 at 7:05 pm

    i swap a pencil for a tree, hit save, go into modio rehash and resign, then drag it back into my harddrive and replace the file but everytime i load up fallout 3 it freezes. Most videos i have seen everyones save files are .fxs but mine are just .fx so i dont know what to do.

  2. Comments  assassinsoftheworld   |  Thursday, 22 July 2010 at 7:09 pm

    so what is that buildings name that you spawned? and how do i spawn a house? i searched for it but i didnt find it

  3. Comments  RealArchaic   |  Thursday, 22 July 2010 at 7:10 pm

    @TheFlamingoShakes

    Only items you have touched will be swapped. Say you have two milk bottle in your inventory and you drop one, and lets say there is one sitting on the shelf. The one in your inventory and the one that you dropped will both be swapped for fill in the blank but the one on the shelf that you did not touch will stay a milk bottle.

  4. Comments  TheFlamingoShakes   |  Thursday, 22 July 2010 at 7:11 pm

    @RealArchaic just re-downloaded and found them thanks, also one more quick question. if I replace a milk bottle with a mailbox will every milk bottle in the game turn into a mailbox?, cause that might cause some problems.

  5. Comments  RealArchaic   |  Thursday, 22 July 2010 at 7:47 pm

    @TheFlamingoShakes

    They are all found in the same folder as the editor lol. They are called fallout3.tsv, PL.tsv, BS.tsv, thepitt.tsv, zeta.tsv just double click on the file and it will open in note pad, do not delete or change the file in any way or the editor will no longer work, just view and copy the ID’s down of what you need.

  6. Comments  TheFlamingoShakes   |  Thursday, 22 July 2010 at 8:16 pm

    where are the world object id’s, i googled and can’t find them. they are not in the folder like you said

  7. Comments  WTFtheyKilledKenny   |  Thursday, 22 July 2010 at 8:29 pm

    @MrGamecrazy101
    It isn’t suppose to be exciting.

  8. Comments  prominer83   |  Thursday, 22 July 2010 at 8:40 pm

    lol @ your character:chuck norris

  9. Comments  obliveon525   |  Thursday, 22 July 2010 at 9:35 pm

    how do i get out of something if i spawned it inside and got stuck inside? and can i control what way something faces?

  10. Comments  CptCaptulon   |  Thursday, 22 July 2010 at 9:45 pm

    Pro stacking thar

  11. Comments  cryptomatic7   |  Thursday, 22 July 2010 at 10:42 pm

    I’m new to this, but how do I remove a tree? I accidently put it in my tenpenny house because it said missing file, so I dropped it and a tree appeared. Please reply, its getting annoying lol

  12. Comments  MrGamecrazy101   |  Thursday, 22 July 2010 at 11:12 pm

    MOST BORING VID EVER!

  13. Comments  H4Tr3DxProductions   |  Thursday, 22 July 2010 at 11:17 pm

    @RealArchaic Ty that helped alot! : )

  14. Comments  RealArchaic   |  Thursday, 22 July 2010 at 11:21 pm

    @H4Tr3DxProductions

    All buildings will start with (STAT), So I just search for STAT and then go down the list in notepad ;)

  15. Comments  H4Tr3DxProductions   |  Thursday, 22 July 2010 at 11:48 pm

    what did u search for to get the frame of the building?

  16. Comments  Munkki378   |  Thursday, 22 July 2010 at 11:57 pm

    Are you able to to remove objects for example corpses, skeletons, chairs, boards, computers etc…?

  17. Comments  RadiationReservoir   |  Friday, 23 July 2010 at 12:55 am

    Got everything working perfect but I know you said to look in the list for stuff you want but like what is the name for the liberty prime bombs and laser beam and like that cool electric thing and the antique nuka-cola machine you had in your modded house in your other video what are the names of those?

  18. Comments  RealArchaic   |  Friday, 23 July 2010 at 1:39 am

    I don’t have any ID’s writen down, I just search the list when I need something lol. The file is called fallout3

  19. Comments  RealArchaic   |  Friday, 23 July 2010 at 2:33 am

    The editor can’t work without the list lol, It’s labeled fallout3 in the folder, just click on it then do a search, Every single item in the game is on there including weather effects.

  20. Comments  6Tony6Castelan6   |  Friday, 23 July 2010 at 2:40 am

    Ok… I know I’m not retarded or blind….but I downloaded the Complicator Save Editor. The Form IDs weren’t in there. Where are they?

  21. Comments  6Tony6Castelan6   |  Friday, 23 July 2010 at 3:13 am

    lol… can’t you just tell me the FID of this ONE structure? Pleeeeeeease?

  22. Comments  RealArchaic   |  Friday, 23 July 2010 at 4:11 am

    Download the save game editor then just click on the text doc in there, They are the lists of every single item in the game, just search them, That’s what I do :)

  23. Comments  6Tony6Castelan6   |  Friday, 23 July 2010 at 4:50 am

    also… do you have a copy of the Form ID lists? I restored my computer and lost them :-(

  24. Comments  6Tony6Castelan6   |  Friday, 23 July 2010 at 5:40 am

    Wow… what’s the Form ID of the structure you first dropped?

  25. Comments  Razeblazeraptor   |  Friday, 23 July 2010 at 6:38 am

    how do u edit add ons when i swap them and go on xbox it freezes

Leave a Reply





Top